Chemistry: Your standard iron solution is 0.1511 M Fe(II), your dichromate solution is 0.0181 M dichromate, and it took 26.84 mL of your standard iron solution to titrate the excess dichromate in your unknown. What is the chemical oxygen demand of the sample, in units of mg O2/L? (Report your answer with 4 sig figs)

PurpleExplanation: It is impossible to land on purple because there isn t an option for it. You can t land on it if it s not a color on the spinner....

Your standard iron solution is 0.1511 M Fe(II),

Ответ:

jazzy2742

21.01.2022

Chemistry

$COD=2030\frac{mg}{L}$

Explanation:

Hello,

In this case, considering the given information the redox reaction is:

$Fe^{+2}+Cr_2O_7^{-2}\rightarrow Fe^{+3}+Cr^{+3}$

Which properly balanced turns out:

$Fe^{+2}\rightarrow Fe^{+3}+1e^-\\Cr^{+6}_2O_7^{-2}+14H^++6e^-\rightarrow 2Cr^{+3}+7H_2O\\\\\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \downarrow\\6Fe^{+2}+Cr_2O_7^{-2}+14H^+\rightarrow 6Fe^{+3}+2Cr^{+3}+7H_2O$

In such a way, one sees a 6 to 1 molar relationship between the standard iron (II) solution and the dichromate, therefore, by using the following equation it is possible to determine the oxygen as shown below:

$n_{Fe^{+2}}=n_{Cr_2O_7^{-2}}$

Thus, the moles of iron (II) solution are:

$n_{Fe^{+2}}=0.1511\frac{molFe^{+2}}{L_{sln}}*0.02684L_{sln}=0.00406molFe^{+2}$

Moreover, the moles of dichormate result:

$n_{Cr_2O_7^{-2}}=0.00406molFe^{+2}*\frac{1molCr_2O_7^{-2}}{6molFe^{+2}}=6.76x10^{-4}}molCr_2O_7^{-2}$

Thereby, the volume of the sample is:

$V_{sample}=\frac{n_{Cr_2O_7^{-2}}}{M_{Cr_2O_7^{-2}}}=\frac{6.76x10^{-4}molCr_2O_7^{-2}}{0.0181\frac{molCr_2O_7^{-2}}{L_{sln}} } =0.0373L_{sample}$

Finally, the chemical oxygen demand result:

$COD=6.76x10^{-4}molCr_2O_7^{-2}*\frac{7molO}{1molCr_2O_7^{-2}}*\frac{16gO}{1molO}*\frac{1000mgO}{1gO}*\frac{1}{0.0373L_{sln}} \\COD=2030\frac{mg}{L}$

Best regards.

0,0(0 оценок)

Ответ:

Ответ:

Ask your question to the AI advisor

More tips

Answers on questions: Chemistry

Ask an AI advisor a question